# djdeck

Terminal DJ suite — Rust + Ratatui + PipeWire graph DSP.

## Architecture

```
┌─────────────────────────────────────────────────────────────┐
│  Ratatui TUI  (16ms loop, crossterm events)                 │
│  OSC server   (UDP :9000 in, :9001 out)                     │
└──────────┬──────────────────────────────┬───────────────────┘
           │                              │
    AudioCmd channel              OscAppCmd channel
           │                              │
┌──────────▼──────────┐        ┌──────────▼────────────────────┐
│  Audio Engine       │        │  App.rs effect dispatch        │
│  (PipeWire streams) │        │  fader → wpctl set-volume      │
│  Symphonia decode   │        │  pitch → pw-cli set-param Props│
│  Raw PCM only       │        │  tempo → pw-cli set-param Props│
└──────────┬──────────┘        └───────────────────────────────┘
           │ auto-connects to filter-chain sink
           ▼
┌──────────────────────────────────────────────────────────────┐
│  PipeWire Graph                                              │
│                                                              │
│  djdeck.deck.a ──► input.djdeck.chain.a                     │
│                        [pitch → lpL/lpR → reverb]            │
│                    output.djdeck.chain.a ──► default sink    │
│                                                              │
│  (same for z, s, x)                                          │
└──────────────────────────────────────────────────────────────┘
```

Each deck stream outputs raw decoded PCM. The PipeWire graph handles all DSP:
- **Pitch shifting** — rubberband `Semitones` port (requires `ladspa-rubberband`)
- **Cutoff filter** — `lowpass_iir` + `highpass_iir` (swh-plugins), `Cutoff Frequency` port:
  - Negative value → lowpass (kill highs), positive → highpass (kill lows), 0 → flat
- **Reverb** — `plate` `Dry/wet mix` port (swh-plugins): 0=dry → 1=wet
- **Volume (fader)** — `wpctl set-volume` on the stream node
- **Tempo** — varispeed in audio engine; rubberband compensates pitch automatically

## Dependencies

### System

**Required:**
```bash
# Arch
pacman -S pipewire wireplumber pipewire-audio ladspa rubberband

# Ubuntu / Debian
apt install pipewire wireplumber ladspa-sdk rubberband-ladspa

# Fedora
dnf install pipewire wireplumber ladspa rubberband-ladspa
```

**Required** (cutoff + reverb):
```bash
# Arch
pacman -S swh-plugins

# Ubuntu / Debian
apt install swh-plugins

# Fedora
dnf install swh-plugins
```

Verify the rubberband LADSPA plugin is present:
```bash
python3 -c "
import ctypes; lib = ctypes.CDLL('/usr/lib/ladspa/ladspa-rubberband.so')
lib.ladspa_descriptor.restype = ctypes.c_void_p
class D(ctypes.Structure):
    _fields_ = [('uid',ctypes.c_ulong),('label',ctypes.c_char_p),('props',ctypes.c_int),('name',ctypes.c_char_p)]
i=0
while True:
    d=lib.ladspa_descriptor(i)
    if not d: break
    print(ctypes.cast(d,ctypes.POINTER(D)).contents.label.decode()); i+=1
"
# should include: rubberband-pitchshifter-stereo
```

### Rust

```
pipewire-rs  (pipewire = "0.9.2")
symphonia    (audio decoding)
ratatui + crossterm
rosc         (OSC)
tokio, crossbeam-channel, serde_json
```

## Build & Run

```bash
cargo build --release
./target/release/djdeck
```

Logs → `/tmp/djdeck.log`. Set `RUST_LOG=debug` for verbose output.

On startup djdeck will:
1. Start 4 PipeWire playback streams, each targeting its filter-chain sink
2. Load `libpipewire-module-filter-chain` for each deck via `pw-cli load-module` (pitch → lpL/lpR → reverb)
3. Wait 800ms for PipeWire to settle, then resolve node IDs via `pw-dump`
4. Explicitly link each chain's output to the default sink via `pw-link -L`
5. Start the TUI and OSC server

Node IDs for each deck are shown in the deck panel title: `[pw:stream/filter]`.

## Keyboard Reference

| Key | Action |
|-----|--------|
| `a / z / s / x` | Focus deck A / Z / S / X |
| `Shift + A/Z/S/X` | Open file selector for deck |
| `Space` | Play / Pause |
| `Enter` | Stop (return to start) |
| `← / →` | Seek ±1% |
| `c` | Set cue point |
| `v` | Jump to cue point |
| `↑ / ↓` | Fader ±5% (via `wpctl set-volume`) |
| `[ / ]` | Pitch ±0.5 semitones (rubberband `Semitones` port) |
| `, / .` | Tempo ±1% (varispeed; rubberband compensates pitch) |
| `- / =` | Cutoff ±500 (negative=LP kills highs, positive=HP kills lows, 0=flat) |
| `o / p` | Reverb wet ±5% (requires swh-plugins) |
| `q` | Quit (unloads filter-chain modules) |

**File selector:** type to filter, `↑/↓` navigate, `Enter` load, `Esc` cancel.
Files indexed from CWD, cached at `$XDG_CACHE_HOME/djdeck/file_index.json`.

## OSC Reference

### Incoming (port 9000)

| Address | Args | Description |
|---------|------|-------------|
| `/deck/<n>/play` | | Play |
| `/deck/<n>/pause` | | Pause |
| `/deck/<n>/stop` | | Stop |
| `/deck/<n>/seek` | `f` 0.0–1.0 | Seek to position |
| `/deck/<n>/fader` | `f` 0.0–1.0 | Set volume (wpctl) |
| `/deck/<n>/pitch` | `f` semitones | Set pitch (rubberband) |
| `/deck/<n>/tempo` | `f` multiplier | Set tempo (rubberband) |
| `/deck/<n>/cue/set` | | Mark cue point |
| `/deck/<n>/cue/goto` | | Jump to cue point |

`<n>` = 0 (A), 1 (Z), 2 (S), 3 (X)

### Outgoing (port 9001)

| Address | Args |
|---------|------|
| `/deck/<n>/loaded` | `s` track name |
| `/deck/<n>/position` | `f` 0.0–1.0 |
| `/deck/<n>/vu` | `f f` L R |

## Inspecting the graph

```bash
# See all djdeck nodes
pw-dump | jq '.[] | select(.info.props["node.name"] | startswith("djdeck"))'

# Live graph view
qpwgraph   # or helvum

# Check filter-chain params for deck A
pw-cli set-param <filter-node-id> Props '{ params = ["pitch:Pitch scale" "1.0594"] }'

# Volume on stream node
wpctl set-volume <stream-node-id> 0.85
```

## Adding more effects

The effect chain abstraction is in `src/effect_chain.rs`. The filter-chain module
`filter.graph` in `EffectChain::load()` accepts multiple nodes wired in series:

```
filter.graph = {
  nodes = [
    { type = ladspa  name = pitch  plugin = ladspa-rubberband  label = rubberband_pitchshifter_stereo ... }
    { type = ladspa  name = eq     plugin = lsp-plugins-ladspa  label = para_equalizer_x8_stereo ... }
  ]
  links = [
    { output = "pitch:Output L"  input = "eq:Input L" }
    { output = "pitch:Output R"  input = "eq:Input R" }
  ]
}
```

No Rust changes needed — just extend the `args` string in `EffectChain::load()`.